7000TLX Bundle: Wall Hangers + Truck Adapters
Bundle includes: 7000TLX portable car lift, Wall Hangers and Truck Adapter Set.
Overview
7000TLX Extended-Length Portable Car Lift
The 7,000-lb. capacity 7000TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Before the 7000TLX , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000TLX allows operator access to more trucks and SUVs than ever before.
Despite the longer, beefier construction, the 7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.
Like QuickJack's lower-capacity portable car lifts (the 3500SLX, 5000TL and 7000TL), built-in durable urethane wheels mean the 7000TLX frames can be rolled around, indoors or outdoors, at your convenience. This is their heaviest model, but no bolts are required, and no special wiring is ever necessary.
The 76" frames are longer than their TL models (the same length as the 5000TLX), but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.
With a collapsed profile just over 3.5", the 7000TLX needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.
Extended-length car lift design
The 7000TLX portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the 7000TLX.
TL minimum lift point spread: 37"
TLX minimum lift point spread: 43"
TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"
TL overall frame length: 70"
TLX overall frame length: 76" (7000TLX model only)
Features
7000TLX
Automatic safety locks
Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.
Increased lifting height
QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.
One-handed operation
By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.
Accessories to increase versatility
Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.
Wall Hangers
- Sold in sets of two
- NEW! Now in powder-coated black!
- One size fits all QuickJack models
- Over-engineered to 150% rated capacity
- Solid-steel construction
- Sleek, laser-cut QuickJack logo design
- Designed and engineered by QuickJack
SUV Adapters
- Features removable stacking pin
- Gain additional 6" lifting height
- High-quality, rugged lifting Tuf-Pads™ by BendPak provide exceptional grip
- Fast assembly/disassembly & transport
- Set of (4) takes up minimal space for easy storage
- Fits all QuickJack portable car lift models (except BL-3500SLX)
Tech specs
Lifting Capacity
| Capacity | 7,000 lbs. (3,175 kg) |
|---|
Lowered Height
| A - Frame only: | 3.5" (89 mm) |
|---|---|
| B - With 2" block: | 4" (102 mm) |
Lifting Height
| D - With 2" block: | 21.5" (546 mm) |
|---|---|
| E - With 3" block: | 22.5" (572 mm) |
| F - Max. height: | 24.5" (622 mm) |
| G - With adapters: | 24.25" (610 mm) |
| H - With adapters + pin: | 27" (686 mm) |
Lift Point Spread
| I - Maximum: | 66" (1,676 mm) |
|---|---|
| J - Minimum: | 43" (1,092 mm) |
Frame dimensions (ea.)
| K - Width: | 12.5" (318 mm) |
|---|---|
| L - Length: | 76" (1,930 mm) |
| A - Height: | 3.5" (89 mm) |
| Weight: | 98 lbs. (45 kg) |
Other Spec
| Time to full rise: | 30 seconds |
|---|---|
| Power unit weight: | 30 lbs. (13 kg) |
| Shipping dimensions (ea. frame): | 80" (L) x 16" (W) x 6" (H) (2,032 mm x 406 mm x 152 mm) |
| Shipping weight: | 304 lbs. (138 kg) |